America's #1 Direct Source for Pool Supplies!

1.800.288.7946 Experts Available 24/7

Call Cart
one day delivery

1 Day Delivery

Your ZIP Code: 20149 Ashburn Change Location

To Ashburn Change
Celebrating 35+ Years!
Source / Promo Code:WYAARUNKEdit
cart overlay

    Showing 0 of 0 item View All

    Estimated SUBTOTAL* :  $0.00

    *Excludes taxes, handling fee, and EZ Pay Service Fee, if applicable.
    Source Code:WYAARUNK Edit

    Hayward Power-Flo Matrix Above Ground Pool Pump

    Above Ground Pool Performance with Hayward Power-Flo Matrix Pumps

    Discover the advantages and amazing technology that makes the Power-Flo Matrix one of Hayward’s top pumps. Superior engineering pairs with reliable operation to create the ideal above ground pool pump. Designed for dependability, durability, longevity and incredible performance, the Hayward PowerFlo Matrix will not only outperform the competition but will also outlast it.

    Specifically designed for the unique elements of an above ground pool, the Power-Flo Matrix is versatile enough to move between vertical to horizontal discharge with the press of a button, while the ultra-durable motor features innovative features like the integrated automatic thermal overload protector, ensuring years of use from this pump. 

    The Power-Flo Matrix pump construction is completely corrosion-proof, and the extra-large strainer basket holds more debris so you spend less time on pool maintenance, while the operation is quiet and non-intrusive. Includes 6 ft. power cord.


    ***PLEASE NOTE: POWERFLO SINGLE SPEED PUMPS CANNOT BE SHIPPED TO CALIFORNIA. To view Title 20 California Code of Regulations, visit the California Appliance Efficiency Database.*** 

    read more
      • Item: # E2206 1-HP PowerFlo Matrix $279.00
      • Item: # E2211 1 1/2-HP PowerFlo Matrix $289.00
      • Product Description
      • Customer Review
      • Product Specification
      • FAQS
      • MORE INFO

      • • Hayward Power-Flo Matrix Above Ground Pool Pump with rear mounted On/Off Switch
      • • Versatile option to move volute between vertical and horizontal discharge
      • • Industrial-sized strainer basket reduces maintenance
      • • Automatic thermal overload protector extends motor life
      • • High-performing impeller has wide openings to avoid debris clogs
      • • Rear-mount switch allows for energy efficient operation
      • • Clear pump lid cover makes it easy to see when it’s time to clean
      • • All PowerFlo Matrix pumps Include a 6 ft. 120V power cord with standard 3-prong plug

      Technical Specifications:

    • Horizontal/vertical discharge feature -- simply converts from vertical to horizontal discharge orientation with the press of a button.
    • Durable, corrosion-proof housing for years of dependable service and all-weather performance.
    • High quality Noryl® impeller with wide openings to prevent clogging by leaves and debris.
    • C-Clip Connector allows for easy disengagement of strainer housing in a matter of seconds for hassle-free maintenance.

      Model Number                  H.P.       Voltage       Pipe Size       Dim "A"       Cord Size          Ctn. Qty.       Ctn. Weight
      SP1591                               3/4           115             1 1/2"             10 7/8"                6‘                       1                     25 lbs.
      SP1592                                1             115             1 1/2"             11 3/8"                6‘                       1                     25 lbs.
      SP1593                              11/2          115             1 1/2"               12"                    6‘                       1                     26 lbs.

    • What are the measurements of the pump?
      – Yes, this pump will work for you. By removing a clip behind the strainer basket and removing four bolts on the back of the motor, this pump can be changed from top to side discharge.

      What size pump should I use on my pool?
      – When sizing a replacement pump, In The Swim strongly suggests that you replace with the same size horsepower as your existing set-up! In most cases, up-grading horsepower shortens your filter’s expected life and voids manufacturer’s warranties.


    • Motor Will NOT Start – Check For:
    • – Improper or loose wiring connections; open switches or relays; tripped circuit breakers, GFCI’s, or blown fuses.
      – Manually check rotation of motor shaft for free movement and lack of obstruction.
      – If you have a timer, be certain it is working properly. Bypass it if necessary.

    • Motor Shuts OFF – Check For:
    • – Undersized wiring; loose connections; etc.
      – Low voltage at motor or power drop (frequently caused by undersized wiring or extension cord use).
          NOTE: Your Hayward pump motor is equipped with an “automatic thermal overload protector.” The motor will automatically shut off if power supply drops before heat damage can build up causing windings to burn out. The “thermal overload protector” will allow the motor to automatically restart once the motor has cooled, provided the power source is again up to proper levels. It will continue to cut On/Off until the problem is corrected. Be sure to correct cause of overheating.

    • Motor Hums, But Does NOT Start – Check For:
    • – Centrifugal switch stuck in OPEN position.
      – Binding of motor shaft.

    • Pump won’t prime.
    • – Make sure pump/strainer housing is filled with water and the cover O-ring is clean, also be sure it is properly seated in the cover O-ring groove. Make sure strainer cover is locked firmly in position and lubricated with water based lubricant.
      – Make sure all suction and discharge valves are fully open and not blocked, that pool water level is at proper level, and that skimmer weir is not hung up or binded on skimmer wall.
      – Block off to determine if pump will develop a vacuum. You should have 5”-6” of vacuum at the strainer cover (Only your pool dealer can confirm this with a vacuum gauge). You may be able to check by removing the skimmer basket and holding your hand over the bottom port with skimmer full and pump running. If no suction is felt, check for line blockage.

      • If pump develops a vacuum, check for blocked suction line or dirty strainer basket, an air leak in the suction piping may be the cause.
      • If pump does not develop a vacuum and pump has sufficient “priming water”:
                      Re-check strainer housing cover and all threaded connections for suction leaks. Check if all hose clamps are tight.
                      Check voltage to ensure that the motor is rotating at full RPM’s.
                      Open housing cover and check for clogging or obstruction in suction. Check impeller for debris.
                      Remove and replace shaft seal only if it is leaking.

    • Low Flow – Generally, Check For:
    • – Clogged or restricted strainer or suction line; undersized pool piping.
      – Plugged or restricted discharge line of filter, valve partially closed (high gauge reading).
         How to correct: Sand filters – backwash as per manufacturer’s instructions; D.E. filters – backwash
      – Air leak in suction (bubbles issuing from return fittings). Re-tighten using Teflon tape.
      – Plugged or restricted impeller or impeller sheared off. Replace including new seal assembly.

    • Noisy Pump – Check For:
    • – Air leak in suction causing rumbling in pump.
      – Cavitation due to restricted or undersized suction line or leak at any joint, low water level in pool, and unrestricted discharge return lines. Correct suction condition or throttle return lines, if practical. Holding hand over return fitting will sometimes prove this point or putting in a smaller eyeball fitting.
      – Vibration due to improper mounting, etc. Put a rubber pad under metal mounting feet.
      – Foreign matter in pump housing. Loose stones/debris hitting impeller could be cause, remove any of the above
      – Motor bearings noisy from normal wear, rust, overheating, or concentration of chemicals causing seal damage, which will allow chlorinated water to seep into bearings wiping out the grease causing bearing to whine. All seal leaks should be replaced at once.
      – Equipment base vibrating.

      Product Downloads
      Pump Information

      The Hayward Power-Flo LX is the newest high performance pump series designed specifically for the rigors of above-ground and on-ground type swimming pools. Featuring a heavy duty motor, Power-Flo LX provides you with dependable performance and quiet operation. An extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more. And because Power-Flo LX is made of the exclusive high strength PermaGlass XL material, it will provide you with years of total pool owner satisfaction.

      When sizing a replacement pump, Dr. Pool strongly suggests that you replace with the same size horsepower as your existing set-up! In most cases, up-grading horsepower shortens your filter’s expected life and voids manufacturer’s warranties.



      • Heavy-duty, high performance motor with integrated automatic thermal overload protector for maintenance-free operation.
      • Maximum performance Noryl impeller with extra-wide openings to prevent clogging by leaves and debris.
      • Heat-resistant, double-sized seal. Long wearing and 100% drop-proof. For fresh and salt water use.
      • Durable, Corrosion-proof housing is made of high performance PermaGlass XL material for years of dependable service and all-weather performance.
      • Clear "see thru" cover lets you see when basket needs cleaning.
      • Over-sized strainer basket has extra leaf-holding capacity that will extend time between cleaning.
      • Integral drain plug for easy maintenance of pump.


      Item#HPInlet/OutletE22003/41 1/2"E220511 1/2"E22101 1/21 1/2"


      Warranty Products